Garbage Collecting Robot

-

 In this project, I have created a robot that will collect all the garbage around it while being controlled manually. 

This robot can be controlled with a mobile application via Bluetooth Technology.

Components Required: 

  • Arduino UNO
  • SG90 Micro Servo Motors
  • 100 RPM Motors
  • HC-05 Module
  • 12v Battery
  • L298N Motor Driver





Here's the working video of the project


I have demonstrated this project in the Etv YUVA program. Click Here



Location: Vijayawada, Andhra Pradesh, India

Comments

Post a Comment

Popular posts from this blog

Network Controlled Quadcopter

-
Image
  Hey there! This project is all about the Quadcopter. In this project, I've created a network-controlled drone that can be controlled through the Internet without any use of any RF technology. Here, I've used NodeMCU as the flight controller and the IP which is obtained when the NodeMCU is connected to the Internet is used as a medium for the transmission of data from the transmitter to the controller. In this project, the laptop acts as the transmitter through a python script the commands are transmitted to the controller. This drone is configured with PID constants as well, to ensure the better stability of the drone. Here, we need to tune the PID constants while testing for the reduction of errors instability. Components Used:  1. 1400kv Brushless Motors x 4 2. NodeMCU 3. MPU6050 4. 12v LiPo Battery 5. 8-inch propellers x 4 6. ESCs x 4 7. APM Power Module  8. Connecting Wires 9. Quadcopter Frame                     ...
Read more

Industrial Automation with Mobile Application

-
Image
  IoT or Internet of things is a technology that deals with bringing control of physical devices over the internet.  Here, I propose an efficient industrial automation system that allows users to efficiently control industry appliances/machines over the internet. For a demonstration of this system, we use 2 loads as industrial appliances or machines and 2 motors to demonstrate an industrial motor.  This system uses ESP8266 as a microcontroller for processing all user commands which also has an inbuilt wi-fi module to connect to the internet and receive user commands from a mobile application which is mainly designed for controlling this system.  Components Required: NodeMCU 4 Channel Relay Module 100 RPM Motor BO Motor 12v LEDs x 2 On sending commands through the Internet, they are first received by the wi-fi module. The module decodes the received information and passes it to the microcontroller for further processing. The microcontroller then switches loads and ope...
Read more